Device is ONLINE but task get the status FAILED (2.4 GHz)
You must be logged in to see this page.
How to start with sepioo?
You must be logged in to see this page.
How does the communication protocol work?
Our bi-directional radio technology acts in the worldwide available 2.4 GHz frequency band and supports 11 channels, spread between 2404 MHz and 2480 MHz. It is important to understand that although our Access Points and USB dongles communicate in the same frequency band like WIFI, the protocol is different. Bandwith of 1 channel: Wifi (22 […]
Is it possible to update the firmware of sepioo Displays?
Yes, in general the firmware of both, sepioo and Smart Industrial Labels, can be updated “over the air” (OTA). To receive the firmware updated, the Labels have to be registered and online in the ESL system. The update will be handled from the PDi Digital support team.
Why is my Access Point not online?
You must be logged in to see this page.
How to use and configure sepioo buttons?
You must be logged in to see this page.
How do you react on a button press?
You must be logged in to see this page.